Precision kit parts and locations...

[Blown77Z]

I received my Precision weatherstrip kit today from MSA. I've figured out some of the pieces by trial and error, but some pieces have me utterly confused.

 

I'm having problems figuring out which piece is for the inner seal on the quarter panel that goes between the glass and frame... I took some pictures for reference to go with this issue.

 

Here's are pictures of what I think should be the inner seal on the quarter panel. I have 2 of these in the kit. One side is coated with a velvet type material.

and

 

IF this is the piece, is the velvet side suppose to be for the glass to rest in AND where does the "90 degree" bend sit???

 

I have 4 more similar pieces without the little spongy piece on the 90 degree bend, here's what they look like:

and

 

ALL six pieces are equal in length, but I only have 4 pieces of glass to which they could possible go to. Could 2 of them be for T-Tops?

 

One thing I did notice was these pieces, when wrapped on the inside of the frame on the quater panel, are to long. Are these pieces in the kit made that way and need to be trimmed accordingly?

 

I also have 2 of these, which are about 18" long with no velvet crap on them. WTF are these for...

and

[Blown77Z]

I talked to MSA yesterday and confirmed I didn't receive the inner seals for the glass to frame, Part # 76836. I received 2 other pieces instead, ugh. I called again today and they are suppose to ship out the inner seals tomorrow.

[Evan Purple240zt]

The top parts you have listed with the fuzz go inside the stainless trim for the window on the door.

 

Evan