VinhZXT Posted August 6, 2001 Share Posted August 6, 2001 Hi all, Have anyone have a clutch type LSD and the half shafts from a 280ZXT won't fit properly? On my LSD the long CV shafts has about 1/2 an inch extra when it locked up with the circlip and the short CV shaft side all the way in but don't lock up. There is no circlip on one side. The fin cover of the LSD doesn't say that it is a Viscos but I think someone might have swap the cover and sell this unit. What do you guys think? Quote Link to comment Share on other sites More sharing options...
VinhZXT Posted August 12, 2001 Author Share Posted August 12, 2001 I got an odd ball LSD.. but problem solved.... Quote Link to comment Share on other sites More sharing options...
Drax240z Posted August 12, 2001 Share Posted August 12, 2001 Hey Vinh, you want to let us know what the problem and solution was so that we don't make the same mistake down the line? Have you always been in phili? I thought you were a california dude... Quote Link to comment Share on other sites More sharing options...
VinhZXT Posted August 13, 2001 Author Share Posted August 13, 2001 Drax240, After I install it in my Z I will do a write up. In the mean time I am taking pictures of everything as I go along. Anyway if anyone have an clutch type LSD and it has the friction plate in the middle then you will have the same problem as I do. I have always been in Philly. I wish I am in the west coast though. Not too many knowledgable Z guys in Philly that I know of. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.