Topher Posted June 23, 2008 Share Posted June 23, 2008 Ok, I have some sweet Wat R8s that I just recently refinished/powdered. Anyways, so I purchased 15mm (each side) spacers to get the wheels to "hopefully" fit. The spacers are made by H&R for Nissan's bolt pattern and come with longer studs. I also picked up open-ended lug nuts. But as I looked at the studs, I noticed that the splines on the shoulder of the stud, the part you press in, are finer than the OEM Datsun studs...is this an issue? Thanks in advance... Quote Link to comment Share on other sites More sharing options...
wheelman Posted June 23, 2008 Share Posted June 23, 2008 Shouldn't be a problem, just press them in and go. Wheelman Quote Link to comment Share on other sites More sharing options...
EMWHYR0HEN Posted June 24, 2008 Share Posted June 24, 2008 as long as the knurl diameter is 12.90 mm you should be fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.