Iowa280zx Posted November 30, 2008 Share Posted November 30, 2008 To start off.. i've searched, have at least 15 pages bookmarked and am at a complete loss atm... I have a 83 n/a 280zx with a 81 turbo motor and harness installed. Everything looks to be wired correctly except this plug. I keep looking for the plug with the wire on the n/a wiring that runs to my ignitor with no success at all. Plus on my model the ignitor wires seem to be brown and blue instead of the black and yellow setup. Can i just manually run a wire from the 6 prong turbo engine harness straight to the ignitor and connect the few other wires that need ran or do i have to use the stock n/a stuff? Any help i can get on this is much appreciated because i'm about to start tearing out my hair. Quote Link to comment Share on other sites More sharing options...
z-ya Posted December 1, 2008 Share Posted December 1, 2008 You need to look at the NA and turbo harness schematic and figure out the differences related to that plug. Then make the correct changes. I know reading those factory schematics really sucks, but that is how I would do it. Not many people are going to be able to answer your question off the top of their heads. Pete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.