Scott_M67 Posted March 12, 2009 Share Posted March 12, 2009 OK, I've done my due diligence and have been searching the archives for the last couple hours for this answer. When installing a L28ET into a 280 while maintaing the 280's 5 speed, will the turbo flywheel and turbo starter mate up with the '77s 5 speed? I know the '77s five speed, flywheel and starter will work but what about the turbo parts. TIA, Scott Quote Link to comment Share on other sites More sharing options...
Spooler Posted March 17, 2009 Share Posted March 17, 2009 Yes, it should work fine. That is what was in my car before I went to a T5 due to eating trannies. 3 of them to be exact. LOL..... If you are going to run higher boost numbers than 8 psi I would start looking for another alternative. Quote Link to comment Share on other sites More sharing options...
aarang Posted March 17, 2009 Share Posted March 17, 2009 Make sure you use the turbo clutch fork and throw out bearing/collar as well. You will need these to mate with the turbo clutch and flywheel. I would use the ZXT starter, as it is a gear reduction type, and is smaller. Aaron Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.