Anyone yank these parts out of their 240z before they dropped in a V8?

[cxracer]

I'm looking for the accelerator pedal and assembly all the way through the firewall to the hook that twists the SU carb throttle connection.

 

Look at the link below and see the section on the lower right labeled "Accelerator Controls" (The majority of the linkage is grayed out)

http://www.blackdragonauto.com/icata...l.aspx?Page=29

 

It has to come from a 240z because the parts changed slightly for the 260 and 280.

 

Here are the pictures of what I have in the car now. When I bought it, the car was set up to use a 4 barrel carb so the linkage was removed and replaced with a cable and wire. I am going back to SU carbs and need to dig up the right parts.

 

I figure these must be throw away parts if you are going to swap engines since most out there are going to use an accelerator cable.

 

I'd be happy to swap the accelerator cable kit I have in my car with someone who has the parts I'm looking for.