skylinedriver59 Posted October 18, 2009 Share Posted October 18, 2009 Im curently working on the Z31 turbo ecu swap on my 70 240z with L28ET but ive run into a little stal. Im wondering what i should do for the ignition control module do i still need it and how do I need to wire it? or can I upgrade to the Z31 set up or buy something like MSD? The original module is wired with the yellow/white and the black/white but the post that im using for the ecu swap says to Insert new pin into slot 34 of ECU connector then connect it to a new wire going to the + coil terminal and Insert new pin into slot 3 of ECU connector then connect to a new wire going to the – terminal of your coil. If i do this do I still need the module? Thanks Quote Link to comment Share on other sites More sharing options...
skylinedriver59 Posted October 19, 2009 Author Share Posted October 19, 2009 Can any one help Im having trouble wiring the z31T coil and ignitor(transistor) on to my 70 240z with L28et. any guidens would be truely appreciated! Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.