Daphur280 Posted February 15, 2010 Share Posted February 15, 2010 I'm running an '83 turbo swap in my 73 240z, and i've followed the wiring diagrams as best as they convey and I'm not getting any spark. I've installed an MSD SS Blaster coil and I believe I have it setup correct, and I'm not getting any spark. I know I'm probably missing important info too so. . . lemme know. Quote Link to comment Share on other sites More sharing options...
Daphur280 Posted February 15, 2010 Author Share Posted February 15, 2010 so I have the Blue wire attached to the NEG terminal on the coil and the Black w/ white stripe connected to the POS terminal on the coil. On the T connector on the module I have the White wire going to 12v IGN, and the Blue wire going to the ECU. Quote Link to comment Share on other sites More sharing options...
Daphur280 Posted February 15, 2010 Author Share Posted February 15, 2010 i guess this should be moved to ignition/electrical. . . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.