yetterben Posted June 15, 2010 Share Posted June 15, 2010 (edited) Well i am trying to use my N/A 81 dizzy in a vr setup. I have hooked the red wire up to the inner line on the ign line for ms. I have hooked the green wire up to the actual shielding part of that cable. I get no rpm signal. I have tried the green right to a ground same thing. I have set d15 to irq trigger and i have switched the jumper from 1-2 to 3-4 for vr timing on my ms1 ver 3.57 board. Kinda stumped why i cant get a signal at all. Brown wire from ms to - on coil. Kinda stumped. I also have jp1 set to 1-2 for vr. When i have j1 not jp1 j1 set to 5-6 my spark led is on d15. thats good. now when i touch either the green or red wired buy hand the injectors click and i get a signal. So why cant i get a signal buy cranking the car? yes dizzy is turning. Edited June 15, 2010 by yetterben Quote Link to comment Share on other sites More sharing options...
yetterben Posted June 15, 2010 Author Share Posted June 15, 2010 I turned the pots ccw a few turns and now i have a rpm signal. No spark yet though. Are the jumpers supposed to be on inverted or normal. Quote Link to comment Share on other sites More sharing options...
yetterben Posted June 15, 2010 Author Share Posted June 15, 2010 (edited) um. ...... i am a tard q16 is empty. Order placed. DOH! Edited June 15, 2010 by yetterben Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.