Challenger Posted March 27, 2012 Author Share Posted March 27, 2012 Hey, sorry for the late reply. The coil pack was off of the dodge mini van, EDIS module was from the Explorer and the VR sensor from a Escort. Just get out to a junkyard and go look around, you learn a ton once you actually see it on a car compared to looking at pictures and reading car models and years. It was quite fun because there are so many of these parts at junkyards so its a sure find, and theyre all cheap! So I finally got the balls to try to start it! Had a few issues with fuel leaks that I will address before I do any more. Also had forgotten there was no idle screw on the throttle body so I was getting absolutely no air into the engine.... drrrr. Sounds like 10% was a good throttle position for a stable idle around 600rpm. You can see the RPMs only fluctuate about 40-50 rpm, not bad for a first start. Hopefully Ill be able to get it where I can let it idle for awhile and Ill see if I feel safe putting the WB02 back on.... Pretty exciting!!! Couldnt have done it without hybridz! More updates to come this week! Quote Link to comment Share on other sites More sharing options...
edsonflores@yahoo.com Posted June 10, 2013 Share Posted June 10, 2013 well thank you challenger. I tried reaching lazeum. he had the same set up his topic was megajolt install on l28 & 3x dcoe. I ended up finding most of the stuff I need plus some busted knuckles from junkyard. I ended up getting the whole edis system module, coil, and the magnet from an explorer and the trigger wheel from the v6 escort. all I need now I guess is the megajolt and some pre maps he had or some one has to atleast get me close to where I need. thank you for replying. Quote Link to comment Share on other sites More sharing options...
edsonflores@yahoo.com Posted June 11, 2013 Share Posted June 11, 2013 hey challenger quick question cutting wheel and sawzall didn't work for you to cut the trigger wheel from harmonic balancer? I ran into same issue I went to try and cut it and the sawzalls blades didn't fit nor cutting wheel. I saw you posted you cut it with hack saw? really is it going to be that much of a pain lol?! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.