mobythevan Posted May 2, 2011 Share Posted May 2, 2011 I got my v3 mainboard built and put the MS3 processor on. I loaded the 1.0.2 firmware. The instructions said the boot jumper is not necessary to load firmware, but it was necessary to load it on my board. I tried a couple times without it and the loader output errors. With the boot jumper it worked fine and now I can see it working with the stim board and tuner studio. Next step is to add the MS3x expander card and look through all the features. I have to get my current settings from MS1 extra manually entered into MS3. So far so good Quote Link to comment Share on other sites More sharing options...
speeder Posted June 25, 2011 Share Posted June 25, 2011 I'm working with my first MS3, hoping to fire up the car tomorrow. 2JZ turbo. Looking forward to seeing how yours works on the LS. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted June 27, 2011 Author Share Posted June 27, 2011 I have been playing with the stepper IAC and trying to help my friend get MS2 on his Talon. So far no problems with MS3. I will add updates when I start running it on the LSx setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.