mldub2
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by mldub2
-
-
I am with you on wiring I also have a 75 but with a turbo motor. I can't get my alt to recharge the battery and my gauges won't light up to.
-
I replied
-
Need engine bay harness . Let me know ASAP
-
I don't have a charge light just a 60 amp gauge and that never goes over 0 amp. When I turn on the light it drop down below 0 amps.
-
I don't know if everything worked before turbo swap. No engine when I got it and it's a new alternator. I will look in the FSM and see what happens.
-
I just put a l28et in my 75 280z and am using the stock alternator from the 75 (new and tested) and a new voltage regulator. When I start the car it runs off the battery. When I remove the negitive cable from the battery car turns off. I have taken the alternator to the auto parts store2 times. Both times they said it was good.
PLEASE ANY HELP.
-
I have a 75 280z turbo I am using a new 75 alt and a new battery and new voltage regulator. My car starts good and run ok right now as long as my battery is charged once i drive it for a little bit It runs like ****. Then back to charging it again.
So I had it tested and they said it's good. What else can it be grounding straps maybe. Any help.
-
Hey guys looking to find a complete L28 turbo engine for sale . depending on your location it may need t be shipped but will handle all expenses. let me know thanks.
There is and engine in San Antonio tx for sell for 400
-
need a 75 280z bash board wire harness asap shiped to san antonio tx
-
How much
-
I almost move to lake Charles to work on kc-10. But bib not work out
-
how much do you want for it.
-
LET ME KNOW HOW MUCH WITH IT SHIPPED TO SAN ANTONIO TX 78254
-
Ok now i just need the engine bay harness and under the harness under the dash.
-
I need the wiring harness and ecu for a 1975 280z. Let me know how much
-
I need a rear brake line. From under the car to the hose for the caliper. It's for a 1975 280z.
Or if there is a way to repair it let me know
-
eBay for 150. I just got some and 82 rotorsn and 87 maxima calipers
-
Does anyone know where a wire diagram is for a 75 280z with 81 L28et engine please.
-
When i get home i will post some pics.
-
When i took out my shifter to replace the shifter bushing b/c of all the free movement. My shifter has a square plastic bushing with a spring. Not the round ones. So what year is my tranny and where can i get that bushing my car is a 75 280z.
-
-
Will i guess it would work if i wanted it to. But i would like to have a 75 76 gas tank. Just b/c fuel line out of the tank and the return line is a little smaller and the 240z tank has more vents on it.
-
I still need one. i got a 240z gas tank but it seems it will not work so still need a 75 or 76 tank.
-
I am also trying to get my wiring done and i am lost with the same side.
need turbo pistons
in Parts Wanted
Posted
I have some turbo piston with rods on them