[All three LED's on MS-II on solid at same time]

When I recently (2 weeks ago) took my MS unit out of my car to flash some new firmware on it. I had the same problem, all my LEDs lit up. Turns out the firmware was corrupt and after I flashed it everything went back to normal.

 

My relays were also shorted out due to an unexpected rain storm. I have new ones on the way.

 

Try re-flashing some firmware and see if that helps.

[Idle mixture issue]

40psi = 440cc/min

 

60psi = 537cc/min

 

60/40 = 1.5

 

square root of 1.5 is 1.22

 

440*1.22 = 537cc/min

 

You have increased your injector output by increasing the fuel pressure so much.

 

If you entered 537cc/min in your Req/Fuel section MS will be injecting the amount of fuel it is expecting to inject.

 

 

 

I am an active member on Zcar and a troll here. Thought I should start getting my foot in the door here.

[painting valve cover is high heat paint really needed?]

Walmart has 98 cent cans of Color Place. Flat black is 98cents and gloss of other colors are a little over a dollar.