thayeti

When I recently (2 weeks ago) took my MS unit out of my car to flash some new firmware on it. I had the same problem, all my LEDs lit up. Turns out the firmware was corrupt and after I flashed it everything went back to normal. My relays were also shorted out due to an unexpected rain storm. I have new ones on the way. Try re-flashing some firmware and see if that helps.

40psi = 440cc/min 60psi = 537cc/min 60/40 = 1.5 square root of 1.5 is 1.22 440*1.22 = 537cc/min You have increased your injector output by increasing the fuel pressure so much. If you entered 537cc/min in your Req/Fuel section MS will be injecting the amount of fuel it is expecting to inject. I am an active member on Zcar and a troll here. Thought I should start getting my foot in the door here.

Walmart has 98 cent cans of Color Place. Flat black is 98cents and gloss of other colors are a little over a dollar.