Jump to content
HybridZ

Lurch2461

Members
  • Posts

    111
  • Joined

  • Last visited

About Lurch2461

  • Birthday 12/30/1949

Profile Information

  • Gender
    Not Telling
  • Location
    Australia

Lurch2461's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Thank you for all your help, I managed to source this part from a parts dismantler in the US for $85.00 landed in Australia. It came with all the hoses and necessary bolts & fittings except for the cooler unit, which I didn't need, as I have an 19 row Earl's unit.
  2. Here in Oz we tend to machine the L series front housing to suit the bigger bearing, but be advised, there is two (2) RB20DET gearboxes. There is an RP71 & RP71C, the RP71 came out on the HR31 & RP71C came out in R32/33 RB20DET and has double ring syncro's and bigger bearing and is the box to buy as it is by far the stronger of the 2. We also use the Z32 5 speed, as it is identical to an RB25DET box at about half the price. In Oz they sell an RB25DET box for AU$1500.00 plus, but are lucky to get $7-900.00 for an Z32 box.
  3. Hi All, I'm looking for the oil cooler/oil filter adapter that bolts to the F54 block on the AUTO 280ZX Turbo. I'm in Sydney Australia so postage will have to be on the price. If anyone can help, please get in touch. Regards, Dennis
  4. Yes! Have read and responded if you can still assist.
  5. Sorry! My most humblest of appologies. I didn't expect them to come through there. Again, please accept my appologies, I have responded to them. Cheers, Dennis in Oz
  6. Any updates on this please? Thanks, Dennis
  7. Hi, I know it might be a pain getting it off, but I would rather pay for the complete deal, rather than have some bits missing, even a single support, because it's going on a rather rare version L series Skyline and some originality is very important. Can you let me know how much to post it to me at P O Box 7N Campbelltown North NSW 2560 Australia and how I should pay you. I have a paypal account if that helps & I would pay the commission it costs to get the money, if any. I had one sent to me a few years ago, but it was kinked at the fuel feed ends and can't be repaired, hence why I'm asking & needing another. This might sound silly to some, but it will not be original if the feed is blocked off or crimped. I know most people would not know the difference, but those that do know will be observant and pick it up. Cheers, Dennis in Oz
  8. Hi All, Would anyone have an L28et fuel rail they would be prepared to ship to Sydney Australia. L28e rails are different as they have a fuel feed to the cold start injector where the turbo one does not. I need one asap as an overzealous helper snapped mine and cant get them in Ozland. Be very grateful if someone could help. Regards, Dennis in Oz
  9. Availability of the shorter P90 valves is somewhat difficult, yet the longer more standard N42 type are much easier to find. As I'm using a ground cam and the base diameter is smaller than original, I have been told that I can use the longer valves with standard lash pads. And if I use the super alloy Ferrea valves, I'm also told I need bronze valve guides. Q1. Is this correct and what base diameter have I got to have? Q2. Is a stainless valve a better option? Thanks, Dennis in Oz
  10. You would be mistaken saying DR30's have 4 bolt half shafts. All of the factory DR's I have and have seen have the conventional 3 x 2 (6) bolt outer flanged half shafts. I didn't ask the question to be told what we already knew from Japan, what they came out of doesn't increase the availability out of Japan. I have seen 3 pairs of them on yahoo in recent times and have purchased 2 of them, the other was by far, more than I was prepared to pay as with freight the item was over AU$1200.00 for the pair and I could make them in Oz for that. Regards, Dennis in Oz
  11. Do you want to sell them and if yes, how much p[lus freight to Sydney Australia. I need more than just one pair though, hence the question about availability. Cheers, Dennis in Oz
  12. Z31 Turbo & HR31 CV Shafts are identical. Cheers, Dennis in Oz
  13. Hi All, Do you have these half shafts in the US? I'm trying to source them from Japan, but they are very thin on the ground over there and extremely hard to get. Cheers, Dennis in Oz
  14. Can you point me to an alternative supplier please? Cheers, Dennis in Oz
  15. Does anyone know if these are the goods? Do they do as they say?? Item number: 250347470220 Cheers, Dennis in Oz
×
×
  • Create New...