BADMAB

Yes, they are the same as the 260 ($149), and we were able to fit three circuit boards behind each lens containing a total of 60 high grade, automotive LEDs. If the person behind you doesn't see you stopping with these, the he/she doesn't need to be driving.

We officially have the kit ready for the 240, let me know if you are interested!

I just added a video to the OP. Enjoy!

Burlington, NC

Also PM'd

PM'd

Sounds good. I will probably know by next week.

I asked the guy that I made them for to shoot a video so I think he's working on it.

I know they fit in a 260 because that is what I used as a test car. Can I go ahead and take your order then?

20 per lens and they all have a 100 degree dispersion angle.

I just added a daytime pick to the OP. Yes, we can make any of the kits with amber LEDs if you request them upon ordering.

I could make them with amber LEDs. You would just need to let me know upon ordering. Nope, no heat issues: they actually run A LOT cooler than bulbs. Most of the time you would not need an electronic flasher because most guys have regular size bulbs up front for a turn signal which draws enough current to trip the older flasher. If you were to need one though I have one available that I sell at cost ($10 shipped).

If you go with that type of LED conversion you will typically be replacing them every 1-2 years because of the lower grade of materials they use. Plus, ours are guaranteed for life, not 30 days or less. Also, you will still have a hot spot in the center of the lens which you would not have if you go with a kit that is on a printed circuit board like this one.