nosms

dat24zg, I just sent you a PM if you have any questions you can contact me anytime. My direct email is mknos@att.net or you can phone me at 602-400-7725. Sorry if you had any issues. I have only had two people ask any questions on the lines after purchase and thought I had taken care of there issues. I is apparent this is not the case and I am sorry for that. Let me know what I can do. Regards, Mike NOSMS

If you slide the nut over the line first. Then tape and cut the line. Remove the tape, insert fitting slide the nut back up and tighten. That way you don't disturb the braided stianless after you cut it by feeding it through the nut. Made it easier for me anyway.

The best way to cut braided line is tape and a beverly shear. You can also use a die grinder but make sure you flush the line befor installing.

We were planing to machine the blocks from delrin. We will make sets for both stock and for the 3/8 line. We are also going to make a cnc bent 3/8 fuel feed line they should be ready in the next few weeks. The metal clips we plan to make in Stainless Steel. All this should be ready by the end of the month. I will keep you posted. You can also check out our web sit for updates. Thanks, Mike www.newoldstockmotorsports.com

We have been taking obout machining the replace blocks and stamping the clamps for the brake lines. Just wondering how big the market would be. Also we have had some requests for CNC bent SS 3/8 fuel lines and I was wonder how much interesest there was. Thanks, Mike NOSMS www.newoldstockmotorsports.com

I am brand new to this site, but was told by some of my customers who are your members I should check this site out. I see from some of the user names more than just a few of you have been customers. Anyway my name is Mike Kenney and I own NOSMS or New Old Stock Motorsports we have been in the restoration business since 1987 and have been in business as NOSMS since 1996. A few months ago I was asked by a friend and one of your members (Andy Zimmierle) if I could make up stainless steel hardlines for his Z-car, like we have for other vintage race cars. We made up the parts and he was so happy we have gone into production on and now have in stock kits for most of the older Z cars. Kits included all Stainless Steel hard lines CNC bent and Flared with all the correct fittings ready to install. They make a weekend project into a hour or two install. Kits are in stock now. The kits run about $225.00 plus shipping depending on the model. We are also making the fuel pick up and return lines as well as clutch lines in Stainless Streel. You can reach me at mike@nosms.com or call me directly at 602-400-7725. Thanks you all for your time, Mike Kenney