[N42/P90 Head Wanted (Or Running L28et/RB/JZ) **Full Ls Swap Trade**]

I have a p90 head available for sale I’m willing to ship from Florida if you’re interested 

[WTB S30 Airflow Meter]

No problem just dm me if you need it

[Distributor and shaft]

I have a distributor no shaft dm me

[280z EFI Relay]

I have a fuel pump relay for a 76 if needed

[WTB S30 Airflow Meter]

I have a refurbed afm off my 76 worked perfect like new. I can do 50 plus shipping

[WTB: 75 and 76 280z interior pieces]

77/78 door panels will not fit 76 and older. Door lock and window cranks moved just enough to piss you off lol. Ask me how I know

[WTB: N42 or E88 Heads]

I have an n42 asking 125 plus shipping I'm located in Tampa fl though so shipping may or may not be bad

[Adjustable Rear Control Arms and strut tower bars f/r 280z]

Hey guys,

 

Just did some major suspension work to my 76 280z and would like to finish it off with some adjustable rear control arms.

 

Also looking for some strut tower bars for both front and rear

 

PM me if you have some you are willing to separate with

[wanted 280z lowering springs]

I've got a set of Eibach and tokicos blue struts I'm selling for 425 plus shipping and fees like new

[Looking to by parts for turbo build]

Bump

[Looking to by parts for turbo build]

I have a pallnett fuel rail hooked up but never used

 

I am currently working on purchasing one if it falls through ill let you know

[Looking to by parts for turbo build]

Interested in a carb turbo surge tank?

Going fuel injected thanks for the offer

[Looking to by parts for turbo build]

I have an edis coil on plug bracket $50 megasquirt relay board with engine harness(poorly wired from PO) $75 stock l28et downpipe with OEM gasket. $30. coil/dist cap/wires (used) $30 for all.

Thanks for the offer but I don't plan on using EDIS or stock exhaust.

 

Is the coil a performance coil?

[Looking to by parts for turbo build]

Bergeronj@mail.usf.edu

[Looking to by parts for turbo build]

Thanks for the offer matt have any pictures of the stuff? also is the regulator a rising rate by chance, and walbro inline or in tank?

 

Im going to start out with the 82 dizzy and hope for the best.

 

My Plan so far is

 

MS2 or Haltech PS500

Garrett t3/t4 50 trim .63 AR

Supra 440s

pallnet fuel rail

F54 Block

P90 head

N42 Intake

Stock TB

Greddy Type S BOV

Greddy Intercooler 24x12x3

Tial 38mm set for 15 psi

walbro 255

2.25" intercooler piping

high out put coil

2.5"+ exhaust with high flow muffler

[Looking to by parts for turbo build]

I am doing the L28et Swap into my 76 280z and I am looking for a few parts

 

Fuel Pressure regulator (sale pending)

MS2 Ecu and harness

Pallnet 11mm oring fuel rail

 

Please send offers including shipping to 33610 (Tampa, FL)

Will send paypal using friends and family to avoid fees

[wtb turbo stuff]

I have a stock turbo with downpipe with no shaft play that spins freely just pulled off running motor I could do 160 shipped with paypal fees unless you send using friends and family transfer then no fees

[Headliner Restoration 76 280z]

I bought the headliner and trim replacement kit from MSA and there are no instructions as to taking the trim pieces or the headliner out. The trim pieces seem to be tucked under the weather stripping and the head liner is under the trim pieces. if anuone could help me by telling me how to remove these pieces it would be greatly appreciated.

[WTB: 240z style bumpers]

Looking to buy 240z bumpers for my 280z. I really want the front bumper more than the rear but i am open to all offers and will consider anything that comes my way. Just PM me with pics and a price.