[280z fuel pump - fuel damper - vent lines 75/76 tank]

Get a new pump why use old tech?

[WTB 78 280z turn signal switch]

I have the entire setup if your still looking, clam shell too.

[help me name these coilovers]

Im willing to bet those springs will be 500lbs rate. Not to mention there tiny and will definitely blow shocks like no tomorrow.

[Rota RK-R - 15"x8" Are available with 73mm hub]

Lucky for us datsuns are lug centric not hub, but a close hub bores always a plus

[wtb broken OEM stereo 240z]

Like I said I have a 520 radio datsun used the same radio for a long time. $40 shipped

[71 240z rear harness]

I have the tail light harness if you can't find it completed. 25shipped for the pair

[280zx distributor and setup]

I have a low mole zx E80-12 dist with coil, module and mounting plate. Bearings are tight no shaft play vac advance works too. 120 shipped if you want it next day.

[wtb broken OEM stereo 240z]

I have a 520 radio looks to be in working shape

[WTB: 280zx BCDD]

Ya that's not the bccd. That's something for ac

[70-71 240z Driveshaft]

I have one for 20 plus shipping

[Tokico Illumina 280z Stuff]

If you have a welder you can make a coil over easily and use any strut or shock you want. Ground control and eibach is a good way to go matched with tokicos

[My $650 budget s130 build]

Your cars looks great. Are those rims rkr's?

 

If you want to make the front end stiffer for cheap you can weld a bar across the bottom where the tension rods attach to the car. Look up 240sx nismo brace for a reference. I did it to my 810 and the front feels immensely more positive. I also added a modded 240sx strut brace, easy enough to do.

[Various Z parts wanted to buy.]

I have the dist. I was told when I bought it a few years ago it's low mileage, which is believe able as it's got no shaft play. I paid 120 shipped if you want it I'll take the same.

[280Z won't idle, has no power, and dies randomly.]

I bet you have a clogged fuel filter. Brap

[WTB: 280ZX NA 5 Speed shifter]

I have one if your still looking

[WTB: Headlight/turn signal harness 240z]

I have a turn signal bulb connector. Just the connector and a few inches of wire. 6 dollars should cover shipping if you want it.

[WTB early 260Z parts]

I have a perfect 260z bumper without the over rider bar if your interested I can txt pics

[280zx with front 240sx coilovers]

82 and on maxima is a completely different suspension then the 280zx

[wtb 79 280zx a/c line]

Hey I found some ac hard lines from my 810. Everything else between the zx and 810 has been pretty close if not the same. I can take some pics of them for you. I also have everything else to go with the ac system.

[260z Window Regulator and Other parts]

I have the mirror brackets

[passenger side 280zx front control arm]

I'll let you guys know after sat thanks

[280zx with front 240sx coilovers]

The easiest method by far has some how been completely over looked here on hybridz. All you need is a ground control or cheap universal coilover sleeves and springs and 2x 2 inch split collars. The factory lower spring perch is removed and the split collars act as the new perch to hold on the coilover sleeves. No welding, barley any cutting and the og strut housing us used.

[passenger side 280zx front control arm]

I will be looking to pick up a passenger side 280zx front control arm this weekend at the manteca datsun swap meet. Preferably one that has a new or newish bushing already pressed in. If I can't find one this sat. I'll pay the shipping. Thanks

[wtb 79 280zx a/c line]

Damn just tossed out a whole ac system sat. Gluck

[Clear side markers]

Make sure to change the bolts on the side markers to plastic ones if your doing the turn signal mod. That way they won't ground to the body, also use the rubber housing shroud.