torev2

Fixed it and she is ALIVE ALIVE!!!! Thanks for all the help. it appears that some wires were loose and I missed the accessory hook up off the ignition. Whew 2 days and a 12 pack is all that is needed somedays!!! Kevin

I do have a haynes manual and now i have downloaded the fsm. I have headlights,tail lights, brake lights, hazards, right turn signal ( left one stays on and doesn't flash same on dash) the main problem is that the key is dead like no power going to starter. I am going back through all of my connections in the am and triple checking to make sure they are tight. Thanks for the advice Kevin

Thanks I will download that. I do have a chiltons book on it but the diagram is small and hard to follow. Thanks again Kevin

Okay here is the deal, I removed the dash from my 72 240z to fix old nasty thing. After hooking up all the connectors I have a few questions.... 1. now car wont do anything when key is turned just lights and 1 turn signal. 2. on the ignition there is 2 wires both red with blue stripe what are these for? 3. I have a red wire that appears to go to the turn signal stalk but nothing hooked to it also a black one with a blade connector on it from same bundle with no connections. I can trace these down with some time but does any one have any ideas as to why it wont do nothing now when key is turned????? Still pulling what is left of my hair out. Also sorry if this was already asked I could not find any topics like this Kevin

I am in search of a wiper linkage for my son's 72 240. Anyone have an extra one they want to sell? Send me a quote with shipping to 77084. Thanks Kevin

Any one know or have a picture of the correct route for all the vacuum lines off the back of the air cleaner? none of these were hooked up when i bought the car, my manual is not real clear think i have most of them figured out but any expert advise is always taken. its a 1973 stock non turbo