[Fuel pump removal (harness connector)]

Im removing the fuel pump in my 78 280z. Ive removed all the fuel lines and loosened the clamps. The FSM says to disconnect the fuel pump harness connector. It says to roll back carpet behind the seat (which i did) and to disconnect the wiring. How do you do this? I see two different sets of wires. Im guessing one set to + and one to -. But how do i disconnect them?? Thank you

usually behind the passenger seat there is 2 wires one is black and

the other one green each one has a connector that goes to the fuel pump

just unplugg those two and you are done....

[turbo from a 1986 in to a 1983 zx turbo]

i have a question ,maybe someone could help me out,

does anyone knows if a turbo from a 1986 300zx could

be intalled in to my 1983ztx any help would be great,,,thanks

[280zx turbo dizzy and shaft wanted]

i have one 80.00 plus shipping

[Wtb digital Cluster and jdm badges]

hello i have a dijital cluster for 60.00 plus shipping

im in dallas tx ,let me know

[WTB z32 front calipers]

if a z32 is from 1990 to 1996 i have the rear and front ones for 65.00 for both plus shipping

they are not new but they were working fine on the car

[WTB z32 front calipers]

Hello fellow z owners.

I want to upgrade calipers since my brakes have gone shot so it perfect for an upgrade.

Im also looking for the front steel lines.

email me at

juanjr84@yahoo.com

Thanks

Juan

[Need a 77 280z ECU]

I have one. For 40.00 plus shipping

[WTB: 300ZX Front Brake Calipers Aluminum]

I have the front. And rear.

For 65.00. For each set. Plus

Shipping

[My car is overchacharging!]

Thanks,i already tried but i don't find a clear answer.the volts gauge

is all the way up and the red ligth is on at all times...

[My car is overchacharging!]

Hi my name is erick anselmo. i have a 1977 datsun 280z but is

over charging,i already replace the alternator,the voltage regulator

the battery is new.the car is at the shop for now any ideas will be great.

 

 

 

thanks

[Z31 Motor in DFW]

sorry for my igorance but a z31 is a1990-1996 z?

if it is i know a place that has one,,,

[1977 ecu for 280z as soon as possible]

Thanks for all the help guys,and for all the offers 280Zone offer me

one.for now i am gonna go ahead an buy his since he is the one that

jump first.but if it somethig else happen i will see any of your offers.

 

 

again thanks..

[1977 ecu for 280z as soon as possible]

Hello guys i am looking for a ecu or a computer for my 1977 280z

if someone has one it would really help alot the cheaper the better.

but i need someone that could be able to sended to me fast since

i have to get my car out of the shop fast ....thanks

[1977 280z owners manual and datsun front hood emblem]

I am looking for a 1977 280z owners manual and a datsun hood emblem.

if any of you have 1 let know .......

[Datsun 521 truck/Swap in L6?]

Hi does any one knows if a 280z,240z,or260z engine would fit a

1971 datsun 521 truck any advice would be apreciated thanks....

[Electronic speedo]

I have a electronic speedo but i dont know if

it will fit your application and it only goes to

120mph.

[The car would not stay on.....]

I will try to put the fuel pressure gauge tomorrow,and i tell you something

maybe you are rigth because last time i check the fuel pump it sound

like it was working rigth but the pressure seems like its not strong enough.

i will check on it and i let you know thanks....

[The car would not stay on.....]

No is not working yet the fuel filter is new,all the injectors are working.

also the throttle valve switch is new,i really can't figure out these problem

these time. i usually fix the cars my self even know im not a mechanic,

but im pretty sure is something electrical i guess my z has to visit a real

mechanic thanks for the help anyway.

[The car would not stay on.....]

Ok i am looking for help or any ideas,abouth my problem, i was driving my car a couple of days ago and it died on my i tried to start the car back but it won't start like it ran out of gas,but the gas tank was almost full.

i call the tow truck they got the car home,after a while it started but

it was shaking and when you accelerate it was misfiring,it died again and

whenever you try to restart the car the battery will sound like it is discharged but when you let the car rest for a couple of hours it will start again but doing the same thing .shaking,misfiring and it will die so far these are the parts i have replaced, i forgot is a 1977 280z fi.

1.fuel pump

2.air flow meter

3.the distribuitor rotor

any ideas would help thanks.....

[WTB: P90, FPR, Non-egr intake manifold, 280ZXT C/V axles + adapters, 280Z stub axles]

I have a non egr intake manifold from a 1975 280z for 90.00 plus shipping,

it only needs a little polishing ....

[Webber DGV Picture]

Well i have a 1977 280z with webers and did not had to fabricate anything

the linkage by the firewall is the stock one...

[WTB 240z, 260z, 280Z with v8 swap]

There is one on dallas craiglist for 5000.00 i believe its a 240z ...

[battery tray, firewall and inner fender area for 240Z]

I am exacly doing the same thing to my car is hard but if you really like your z you will do anything......

[My car with weber carburators won't start]

Thanks i found the problem it was the fuel pump.so i went to buy a electric one the mecanical one sucks! but one of the carburators is making explosions is trowing some flames.

does anyone knows what is it...

[My car with weber carburators won't start]

Actually the only thing i replaced was the fuel pump the electric one for a mecanical one, today was the first day for my car with the weber carburatorsat the begining they work ok ,the spark plugs were alittle black but they were not wet i haven't check the spark the car cranks the starter two i also put some gas and starter fluid in the carburators but it won't start i guess i have to check the coil and the spark on the spark plugs also the ignitor is new.