leifbert
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by leifbert
-
-
I just put together a 240Z with a L28Et and MS2 V3.57. I bought the GM coolant temperature sensor from DIY and I can't find a spot to install it. The new sensor is much larger then the oem sensors. Any advice? Thanks.
-
Wow, it is a good thing I asked. Thanks.
-
I intend to run an oil cooler in the future. Leaving the adapter there would simplify my future plans.
-
I am preparing a L28Et for installation in my 240Z. The motor has a factory oil cooler and I would like to block it off for now to simplify the installation. I bought adapters and AN blockoff caps to replace the factory banjo bolts. It just occurred to me that I don't know if the motor need to flow oil through the oil cooler fittings for proper oiling. Does anyone know if it is safe to block the cooler lines?
Temp Sensor
in MegaSquirt
Posted
Thanks for the good advice. I removed the thermostat housing and drilled and tapped two of the holes to 3/8 NPT. This allowed me to run my coolant temp sensor as well as the temp sensor to trigger the electric fans.