Bezy240

The setup was perfect. everything worked out great. thank you Gvincent

Thank you guys. I got the slave cylinder. now I have to find the rest of the fittings. I am going to order the tilton 7/8 master from summit 75-875N and then worry about the plumming next.

Sorry is been acouple days. I am tring to use the orignal setup. I made a braket to mount the master to the fire wall. I'll try bleeding it that way this weekend.

I need help badly. I need some part numbers and setups. I swaped an 97 Camero LT1 T-56 setup complete. I tried using the orignal clutch slave cylinder and master, but I cant get it to bleed out. there is not enough clutch pedal to release clutch. I have also replaced the lines with a steel braded line because the OE line was to short. OF course I had to rerought it up and down the firewall. I've had enough of it because it has no bleeder screw. It's been 2 weeks messing with it. I have searched the fourm for about 3 days and comming up with no results. Is there anyone out there with a good set up please reply. brand, part numbers, where to get it.

Deja has a great Idea and picture. so can I do this . Im going to loop the heater core hoses 1 & 2 together and the Tee in the steam vent to the loop of the heater core, that looks alot easier. that should work right.

I was just wondering about my steam vent tube that goes to the back of the head. Right now it is hooked up to one of the TB pipe an OE design. I was thinking about hooking the other pipe from the TB to the lower radiator Tee. that will still able me to use the coolant cooled TB. some one let me know if it is ok to do that.

I need some advise on plumming my water pump. I have been reading an the cooling system for about a week and still cant find any answers on my situation. Here is what i got a 97 LT1 with the F body water pump. I have pluged of my #3 pipe. took out the TB hoses and cap off. the steam vent tube that comes from the back of the head is T'ed into the lower radiator hose. I have no heater core at this time . does the other 2 outlets from the water pump get blocked off or should I rought them together to each other . Let me know if I am doing it right.