LS130
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by LS130
-
-
On 10/26/2019 at 8:06 AM, Brownsuga280zx said:
No pics yet. But I realize I have to make room for trans cooling lines and wire harness connector
I have to do the same. I have the tranny under the car right now, but have been focusing on other aspects of it before I cut out the factory tranny mounts.
-
On 10/14/2019 at 3:02 AM, Brownsuga280zx said:
Enjoying all the great info. I have a 79 280zx going through a 5.3 ls/4l80e swap right now. Just getting started. Has a Ls4 intake I snagged complete out of a parts yard, with adapter plate for 5.3 throttle body. Later on I'll look into a ls1 or ls6 intake. Eventually will be a 6 speed T56 or CD009. Of course I have same issues of engine placement and supporting parts being worked out.
Have a picture of the trans tunnel after massaging it to fit the tranny?
-
Any updates on this?
-
This may have sealed the deal for me wrapping mine. Just curious, what tools did you use for sanding? I will probably end up buying whatever you used.
-
On 5/6/2019 at 9:57 AM, Spike243 said:
If you posted something I don't see it.
-
On 3/28/2019 at 5:20 PM, Spike243 said:
Thank you for the update. Curious to see the pics of the massaging done.
On 3/28/2019 at 5:20 PM, Spike243 said:I have made some progress on the project lately. I ended up using the transmission mounts provided in the JTR 280zx small block swap kit. I had to drill holes in the tunnel and "massage" the tunnel with a hammer. I do not have the transmission fully bolted up but the mounts are finalized and I am doing some work on the transmission itself and the engine right now. I can say that a lot of "clearance" work has to be done to the tunnel to make everything fit nicely. I may be able to get the transmission and engine mounting finalized and pictures taken this weekend. I also got my turbo this week so I will be figuring out how to mount and pipe that bad boy soon.
-
Anymore updates ?
On 3/12/2019 at 9:38 PM, Spike243 said:Just wanted to give everyone a little update on my swap progress. I got the JTR motor mounts installed, chevy smallblock to LS adaptors installed, and the engine sat in the engine bay. I need to do some adjustment to the engine position but so far everything is looking good! I am seriously toying with the idea of going turbo right away. I looked into using the truck manifolds and cutting the stock flange off and welding a Vband in its place. Does anyone have any insight on how to route exhaust in this case? I am thinking of going up-forward with the stock manifolds to the turbo and then from the turbo down the passenger's side of the block and then out. Any thoughts on this? I think that as of now, I have 2 big hurdles.
- Mounting the 4L80e I have (Not too sure how to make a mount the tunnel or to the framerails ).
- Routing of all exhaust
Anyways, here are some pictures of the swap so far.
-
I am just going to reuse the radiator that is currently in the car, has a trans cooler in it as well apparently so I am going to try that out also for the 4l80e. Should have the old engine pulled tonight/tomorrow morning, then I will be dropping the 5.3 and 4l80e into it and getting things wired / buttoned up.
-
Also, what are yall doing with your gauge cluster? I am trying to think up ideas on what to put in place of the stock datsun cluster because that won't be any good with the gm ecu.
-
I have what seems to be a decent size alum rad currently in mine. Just need to rip the engine out w/ the belt driven fan and figure out what size fan/shroud I can mount to it.
For those running fuel cells? Which one did you go with? I am not sure if I want to use the stock datsun tank still or just run a 15gal fuel cell in the back with a sump and external pump.
-
What radiator / fans are yall going with?
-
In for the same info. I am assuming the OEM GM LM7 pan wont work. Thing seem pretty long.
-
Great thread. Awesome info here. I will be doing an 5.3 swap on my 1980 280zx in the near future. Just trying to gather all the info I need before hand.
Anymore updates Subhuman? Your build is coming along great.
280zx's with Ls swaps
in Gen III & IV Chevy V8Z Tech Board
Posted
Anyone have a picture of their trans tunnel after they clearanced it to fit the 4l80e?