Frank J
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Frank J
-
-
Hello all,
I have come across an issue that I can't easily solve myself yet and was hoping for some advice or shared knowledge. When driving my Z for the first time after ten minutes of drive time I lost all power and the car shut off completely (no lights,no crank) I couldn't restart it until I waited 5 to10 minutes then it started up again normally.
I have narrowed my solution to 3 options...
#1) save a few hundred dollars and pay a really good technician to fix my issue.
#2) buy 2 or 3 more common parts that might be causing the problem and replace then unnecessarily; I have read the a bad fusible link, a bad ignition switch or a bad ballast resistor could be at fault.
#3) continue to read, do research, and ask until I can pinpoint the exact fault and fix it.
I was wondering if you had read or have come across anything like this problem and if you had any suggestions?
Thank you for taking the time out of your busyschedule to read this and for considering to help.
-
Hello all,
I have come across an issue that I can't easily solve myself yet and was hoping for some advice or shared knowledge. When driving my Z for the first time after ten minutes of drive time I lost all power and the car shut off completely (no lights,no crank) I couldn't restart it until I waited 5 to10 minutes then it started up again normally.
I have narrowed my solution to 3 options...
#1) save a few hundred dollars and pay a really good technician to fix my issue.
#2) buy 2 or 3 more common parts that might be causing the problem and replace then unnecessarily; I have read the a bad fusible link, a bad ignition switch or a bad ballast resistor could be at fault.
#3) continue to read, do research, and ask until I can pinpoint the exact fault and fix it.
I was wondering if you had read or have come across anything like this problem and if you had any suggestions?
Thank you for taking the time out of your busyschedule to read this and for considering to help.
Repair solution for bad turn signal switch
in Interior
Posted
Thank you for this post. Switch
Thank you Smyrna388z 😃
I found a switch that has the same function as the 240Z switch, and wires up the same way as the original part so I didn't have to cut or bypass any wires, the housing of the switch is a little bigger than the switch used above so I had to fabricate a larger base plate to mount it on the 240Z turn signal frame but it works great, it has been reliable and very affordable.
https://www.amazon.com/American-Autowire-500148-Toggle-Signal/dp/B009T4TPRM