Jump to content
HybridZ

rjwill

Members
  • Posts

    2
  • Joined

  • Last visited

Profile Information

  • Location
    US

rjwill's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Update: so I’ve traced about every wire I couldn’t. Find a break. I test all the wires with multimeter. All were around .01-.03 on resistance. (Not electrical expert) if I run a hot wire to the red wire on the fuze box all the lights work. I can’t turn the headlights off at the switch but the switch will turn off taillights. There is also a 6 prong connector under the steering column with the black and white wire I believe ignition. If I twist that I hear a click and the a/c fans kick on and the tail lights will work.
  2. Hey guys i know this has been asked 100000 times but i havent seen one to my extent. Basically the only lights that do work are blinkers. The headlights did work for a very short period of time. I have a 75 280z. I have checked fuzes i have rebuilt the combo switch i bought a "newish switch" rebuilt that one too. Nothing. I am not an expert. the PO did something funky with the fuzeable links he ran a hot wire to one of the blocks. I ran a continuity test from the right side of the fuze to the white and red wire and it checked out. not sure the best way to test ground or where it runs too. dash has not been replaced or remove. I have checked the brown and white 10 pin plug but didnt see much. All the bulbs are new. Once i get this fixed i plan on swapping out the LED to take some stress off. O and the whippers work.
×
×
  • Create New...