Jump to content
HybridZ

Mike745

Members
  • Content Count

    3
  • Joined

  • Last visited

  • Feedback

    0%

Community Reputation

0 Neutral

About Mike745

  • Rank
    Newbie

Profile Information

  • Location
    Toronto, Canada
  1. So I swapped to the e12-80 module no spark. Switch back to the e12-92 module and tons of spark go for a drive start to give it and it dies. Wait a bit and wiggle the wires on the top of the module and it starts. What you think is happening?
  2. My 240z has been giving me trouble for way too long. At first I was having hesitations at highway speed or during aggressive acceleration. On reddit it was suggested that may have been a distributor issue. So I swapped out the points and cap and condensers and whatever else. Spark Plug wires swapped too. Still problems. So I headed to the forums and decided that the distributor itself was the issue so I swapped it to an electronic distributor from a 280zx. Did some mild re-wiring, cut out the ballast (BW to GW and BW to terminal on coil) soldered and we were good to go or so I thought. It
  3. My 240z has been giving me trouble for way too long. At first I was having hesitations at highway speed or during aggressive acceleration. On reddit it was suggested that may have been a distributor issue. So I swapped out the points and cap and condensers and whatever else. Spark Plug wires swapped too. Still problems. So I headed to the forums and decided that the distributor itself was the issue so I swapped it to an electronic distributor from a 280zx. Did some mild re-wiring, cut out the ballast (BW to GW and BW to terminal on coil) soldered and we were good to go or so I thought. It
×
×
  • Create New...