Jump to content
HybridZ

COOP SNOOP

Members
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • Location
    Honolulu, Hawaii

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

COOP SNOOP's Achievements

Rookie

Rookie (2/14)

  • One Year In Rare
  • First Post Rare
  • Conversation Starter Rare
  • One Month Later Rare
  • Dedicated Rare

Recent Badges

0

Reputation

  1. @NewZed Still no power at fuse block on top 2 left fuses. The WR wire is getting 12v now which I dont think it did before but the solid R is not getting power which I believe is required for everything to work right?
  2. @NewZed Thanks for the suggestion. I have followed that write up and flipped the board and resoldered the 4 wires. All remains the same. All lights work except hi/lo. Any ideas?
  3. Aloha everyone, Looking for some suggestions on troubleshooting my headlights. I have the Dapper LED 7's. They worked great until very recently, the low beam and high beam would only work intermittently which was an issue pre-dapper. The tail lights, parking lights, turn signals, marker lights and all interior lights work great but the lo/hi have now ceased functioning. I have since following datsundave's videos and have completely cleaned the combo switch/turn signal. Much crisper now but still no hi/lo. -No power to the two headlight fuses on the fuse block. -Headlight fusible link is receiving 12v on both ends. -When manually adding a separate external 12v source of power, the hi/lo work great. -I have cleaned various connectors as related to the headlights on the wiring diagram. Suggestions? TIA *edit; I have replaced all fuses according to FSM
×
×
  • Create New...