audandash
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by audandash
-
-
Thought i would try again. The rhd wiper cowl is the big thing. Surely someone has one .
-
Hey guys. Im am looking for a rhd heater box and rhd wiper cowl ro complete my real s30 (1/73). Any help would be appreciated. Thanks
-
I would def be interested in the future. Doing an rb swap isnt cheap as it is so any cost savings is appreciated. I have browsed through the forums numerous times and seen your oil pan work so i am sure your mounts would be top notch as well. Keep us posted. Mine would be for a rhd. Mckinneys will work so i am sure yours would as well.
-
Nice Clark. I agree any pics would be great! I am still a bit away from doing a swap but have been researching the rb the ka and even an ls1. i want to do everything right so i am working on all my suspension stuff first. i have been learning to weld and have some patch panels to put in and some new zedd finding floor pans. my l24 runs decent but i want to eventually have more power. after reviewing all the engines avail the ka seems to be the most cost effective when it comes to power for the dollar. i dont have an fabricating experience so i may eventually do the mckinney mounts just to make sure its right. its a bit pricey but like i said i want to make sure its right. i also have a 68 2000 and the engines are rather pricey to rebuild. thats another reason i am looking at a ka. i want to get familiar with it so i can most likely put one in the roadster as well down the road.
-
did you make mounts or did you use mckinney?
-
thanks guys, i am still in the gathering info stages but could not find that info anywhere. i was really close to you today clark. we where in jackson
-
Hey guys, i have been looking at doing a possible ka24 swap in my 240 but cant seem to find any info out about the drive shaft. Do you have to get a custom drive shaft made like the rb's? any info is appreciated.
-
Awesome thread! Keep up the good work. i am in research mode and so far this has been a great help!
-
Longs story short worked on my carbs a few weeks ago. I go them cleaned up nice but did not put a sealer on it We got massive flooding and all the moisture in the air wiped out most of my work lol. Flash rust city. When I was cleaning up this time i thought i would have some fun with it. Since i was taking them apart and cleaning all the little parts anyway i decided to add some color. I had played with the green a few months ago and put it on one carb dome and decided i liked it. I redid it today as well as the other dome and cleaned and powdered a lot of other misc parts. Should look really nice when i am done. Here are some of the parts i did today. I am gonna work on the bolt heads tomorrow and hopefully get them back together so you can see the big picture.
trying to decide on one last color. i still need to do the balance tube and intakes and heat sheild. i am thinking yellow. any suggestions. or go chrome with a yellow translucent on top? any ideas. i am going to work on it tomorrow.
-
Longs story short worked on my carbs a few weeks ago. I go them cleaned up nice but did not put a sealer on it We got massive flooding and all the moisture in the air wiped out most of my work lol. Flash rust city. When I was cleaning up this time i thought i would have some fun with it. Since i was taking them apart and cleaning all the little parts anyway i decided to add some color. I had played with the green a few months ago and put it on one carb dome and decided i liked it. I redid it today as well as the other dome and cleaned and powdered a lot of other misc parts. Should look really nice when i am done. Here are some of the parts i did today. I am gonna work on the bolt heads tomorrow and hopefully get them back together so you can see the big picture.
-
Looking for a good drivers door glass for a 71z, or I may be interested in buying a complete door with or without interior panels.
should have the glass you want. i will look for you tomorrow.
-
Want to buy a 75 280z engine bay complete harness from the coil end to all the way through the interior fuse box. I have the 76 harness into my 75 and it seem like it doesn't want to work on my car. So anyone tat has what I want, please pm a price and well go from their. Thanks
will look for you tomorrow. i need to see what kind of shape it is in.
-
did try out the out gasssing primer the other day. it did seem to help.
-
i do want a bigger oven but it will have to wait. i lucked out and got a dual oven 5 mins from my house for 50 bucks. works great just standard sized.
-
gonna resrfresh all the hydraulics new slave, master and clutch master. new lines, pads and shoes. new plugs, wires and a new booster.
-
by the way great pics rb. looks awesome
-
thanks rb. i picked up some outgas primer from columbia coatings today. i am going to test it out tomorrow. I am going to redo the green mirror. There where not many outgassing bubbles, probably cant see them in the pic, but enough to bother me. I am going to try it again tomorrow and see how it turns out. I may post some pics of it tomorrow as well. i will let you know how it turns out. Its pretty inexpensive and i have heard many good things about it. howdy phil. i assume i will see you tomorrow lol? as long as the roads arent bad
-
here is a carb dome i did yesterday using columbia all in one chrome powder. doesnt look bad to be a powder. you can see my powder oven in the background too. lucky find for 50 bucks
-
pure pontiac and rbpowered have you guys had any issues with outgassing? if so what did you do to resolve
-
Right now i have a the basic eastwood hot shot gun. its my first one and not to bad. I really want to upgrade to a kool koat gun from columbia coatings. They are not far from my house and where all my powders come from now. I got the kit which was like 140. comes with plugs, wire etc... def make sure you get those things as it makes your life easier. I have not made it to the flakes and such yet. Looks awesome. I have only been doing this for a few weeks trying to get the learning curve down. as for the oven i use a standard oven i have in my garage i found on ebay. its nice though bc its a stacked oven so i have extra space.
-
Hey guys i was in my garage playing with my powder gun and wanted to share. The carb dome is mine but i did the fuel bracket (74 260z) and a bullet style mirror for a friend. Playing with the satin black and fluorescent green from columbia coatings. Great stuff!!!
-
-
i have a set of gold snowflakes on ebay right now. also have a set of silver snowflakes available as well.
-
I have what you are looking for. i will need to pull them and see what they weigh for shipping. whats your zip so i can get you a quote?
Wtb. S30 rhd cowel and rhd heater box
in Parts Wanted
Posted
Bump