Jump to content
HybridZ

audandash

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by audandash

  1. Thought i would try again. The rhd wiper cowl is the big thing. Surely someone has one .
  2. Hey guys. Im am looking for a rhd heater box and rhd wiper cowl ro complete my real s30 (1/73). Any help would be appreciated. Thanks
  3. I would def be interested in the future. Doing an rb swap isnt cheap as it is so any cost savings is appreciated. I have browsed through the forums numerous times and seen your oil pan work so i am sure your mounts would be top notch as well. Keep us posted. Mine would be for a rhd. Mckinneys will work so i am sure yours would as well.
  4. Nice Clark. I agree any pics would be great! I am still a bit away from doing a swap but have been researching the rb the ka and even an ls1. i want to do everything right so i am working on all my suspension stuff first. i have been learning to weld and have some patch panels to put in and some new zedd finding floor pans. my l24 runs decent but i want to eventually have more power. after reviewing all the engines avail the ka seems to be the most cost effective when it comes to power for the dollar. i dont have an fabricating experience so i may eventually do the mckinney mounts just to make sure its right. its a bit pricey but like i said i want to make sure its right. i also have a 68 2000 and the engines are rather pricey to rebuild. thats another reason i am looking at a ka. i want to get familiar with it so i can most likely put one in the roadster as well down the road.
  5. did you make mounts or did you use mckinney?
  6. thanks guys, i am still in the gathering info stages but could not find that info anywhere. i was really close to you today clark. we where in jackson
  7. Hey guys, i have been looking at doing a possible ka24 swap in my 240 but cant seem to find any info out about the drive shaft. Do you have to get a custom drive shaft made like the rb's? any info is appreciated.
  8. Awesome thread! Keep up the good work. i am in research mode and so far this has been a great help!
  9. trying to decide on one last color. i still need to do the balance tube and intakes and heat sheild. i am thinking yellow. any suggestions. or go chrome with a yellow translucent on top? any ideas. i am going to work on it tomorrow.
  10. Longs story short worked on my carbs a few weeks ago. I go them cleaned up nice but did not put a sealer on it We got massive flooding and all the moisture in the air wiped out most of my work lol. Flash rust city. When I was cleaning up this time i thought i would have some fun with it. Since i was taking them apart and cleaning all the little parts anyway i decided to add some color. I had played with the green a few months ago and put it on one carb dome and decided i liked it. I redid it today as well as the other dome and cleaned and powdered a lot of other misc parts. Should look really nice when i am done. Here are some of the parts i did today. I am gonna work on the bolt heads tomorrow and hopefully get them back together so you can see the big picture.
  11. should have the glass you want. i will look for you tomorrow.
  12. will look for you tomorrow. i need to see what kind of shape it is in.
  13. did try out the out gasssing primer the other day. it did seem to help.
  14. i do want a bigger oven but it will have to wait. i lucked out and got a dual oven 5 mins from my house for 50 bucks. works great just standard sized.
  15. gonna resrfresh all the hydraulics new slave, master and clutch master. new lines, pads and shoes. new plugs, wires and a new booster.
  16. thanks rb. i picked up some outgas primer from columbia coatings today. i am going to test it out tomorrow. I am going to redo the green mirror. There where not many outgassing bubbles, probably cant see them in the pic, but enough to bother me. I am going to try it again tomorrow and see how it turns out. I may post some pics of it tomorrow as well. i will let you know how it turns out. Its pretty inexpensive and i have heard many good things about it. howdy phil. i assume i will see you tomorrow lol? as long as the roads arent bad
  17. here is a carb dome i did yesterday using columbia all in one chrome powder. doesnt look bad to be a powder. you can see my powder oven in the background too. lucky find for 50 bucks
  18. pure pontiac and rbpowered have you guys had any issues with outgassing? if so what did you do to resolve
  19. Right now i have a the basic eastwood hot shot gun. its my first one and not to bad. I really want to upgrade to a kool koat gun from columbia coatings. They are not far from my house and where all my powders come from now. I got the kit which was like 140. comes with plugs, wire etc... def make sure you get those things as it makes your life easier. I have not made it to the flakes and such yet. Looks awesome. I have only been doing this for a few weeks trying to get the learning curve down. as for the oven i use a standard oven i have in my garage i found on ebay. its nice though bc its a stacked oven so i have extra space.
  20. Hey guys i was in my garage playing with my powder gun and wanted to share. The carb dome is mine but i did the fuel bracket (74 260z) and a bullet style mirror for a friend. Playing with the satin black and fluorescent green from columbia coatings. Great stuff!!!
  21. have a set of gold snowflakes up on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330402814833&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1134
  22. i have a set of gold snowflakes on ebay right now. also have a set of silver snowflakes available as well. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330402814833&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1134
  23. I have what you are looking for. i will need to pull them and see what they weigh for shipping. whats your zip so i can get you a quote?
×
×
  • Create New...