Z31Guy
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Z31Guy
-
-
Ok, i have gone through and done what i can of maping an initial, and filling in all the gaps that i had asfar as programing the MSq-II... hope it works this time! lol
oh, question... for hooking up a V-6 what banks should i be plugged into for what piston? frome the front right i have 1-3-5 and left is 2-4-6 right now i have each side to it's own bank (right to green bank, left to blue) ... it is what i have read, is it correct?
Thanks guys.
-
Hey guys, you all seem to be pretty knowledgeable on the subject of MS-II, well, i just finished the build, and most all the wiring into the car, and ... yeah... no spark...
Just about to get upset, any clues as to what i could do?
The only things i dont have hooked up are the fuel pump (still on old ECU) and O2 (trying to figure out the feed wire i need to splice) no sure about TPS, but i have tryed it both ways, so i know that doesnt matter...
I have no idea on how to tune this thing, but i didnt think that would prevent a start... so, i borrowed a map from a 240sx, seemed similar enough, so i changed engine size/cylender count/injectors/etc. but, that is about all i know, any help would be great!
thanks guys,
Cody J.
Oh, yeah,
i have an 87' 300zx turbo... also, i am not sure about the distributor hook up, i used red for power, white to pin 25, and black to pin 2 on the MSq-2 v3.0 board.
-
Hey guys, i am looking for some top feed fuel rails from and 84-86' 300zx
Just something that is top feed/hose barb type that will work for an 87' 300zx Turbo... got the injectors, forgot bout the rails! lol
Thanks guys,
Gots the cash for yo trash!
-
hey guys, i have been searching for what feels like forever! where are the "main relay" and the Fuel pump relay"s located in an 87' 300zx turbo? any one here done a MSq-II i one before?
Just trying to get this stuff straight.
thanks guys,
Cody J.
-
hey guys, i must be really dumb not to be able to figure this out, but... i just can't figure out how to wire this thing up.
87' 300zx Turbo:
MSq-II v3.0
I mean, i could build the darn thing, but i just dont know what wires to connect where...
thanks for any help you feel like handing out
(I used the search ALOT!)
just doesnt seem to click for me.
-
hey, just wondering if this map will work for my Z:
87' 300zx Turbo
stage 3 clutch/12lbs flywheel
3" intake/exhaust
2.5" piping/24x3x13" intercooler
T-3 8lbs Boost
wideband O2
255 walbro/420cc injecters
bout to add some major cams
i really just want a map for the MS-II that will correct the timing and fuel for the larger injectors and pump, i will have it tuned after the cams/head work/overbore/stroke out/T-4 upgrade, but i would like to be able to have fun with it in the mean time... work on a budget you know! lol
Thanks for playing!
Starting MS test install, advice needed
in MegaSquirt
Posted
K, thanks.... My bad! lol