Z31Guy

K, thanks.... My bad! lol

Ok, i have gone through and done what i can of maping an initial, and filling in all the gaps that i had asfar as programing the MSq-II... hope it works this time! lol oh, question... for hooking up a V-6 what banks should i be plugged into for what piston? frome the front right i have 1-3-5 and left is 2-4-6 right now i have each side to it's own bank (right to green bank, left to blue) ... it is what i have read, is it correct? Thanks guys.

Hey guys, you all seem to be pretty knowledgeable on the subject of MS-II, well, i just finished the build, and most all the wiring into the car, and ... yeah... no spark... Just about to get upset, any clues as to what i could do? The only things i dont have hooked up are the fuel pump (still on old ECU) and O2 (trying to figure out the feed wire i need to splice) no sure about TPS, but i have tryed it both ways, so i know that doesnt matter... I have no idea on how to tune this thing, but i didnt think that would prevent a start... so, i borrowed a map from a 240sx, seemed similar enough, so i changed engine size/cylender count/injectors/etc. but, that is about all i know, any help would be great! thanks guys, Cody J. Oh, yeah, i have an 87' 300zx turbo... also, i am not sure about the distributor hook up, i used red for power, white to pin 25, and black to pin 2 on the MSq-2 v3.0 board.

Hey guys, i am looking for some top feed fuel rails from and 84-86' 300zx Just something that is top feed/hose barb type that will work for an 87' 300zx Turbo... got the injectors, forgot bout the rails! lol Thanks guys, Gots the cash for yo trash!

hey guys, i have been searching for what feels like forever! where are the "main relay" and the Fuel pump relay"s located in an 87' 300zx turbo? any one here done a MSq-II i one before? Just trying to get this stuff straight. thanks guys, Cody J.

hey guys, i must be really dumb not to be able to figure this out, but... i just can't figure out how to wire this thing up. 87' 300zx Turbo: MSq-II v3.0 I mean, i could build the darn thing, but i just dont know what wires to connect where... thanks for any help you feel like handing out (I used the search ALOT!) just doesnt seem to click for me.

hey, just wondering if this map will work for my Z: 87' 300zx Turbo stage 3 clutch/12lbs flywheel 3" intake/exhaust 2.5" piping/24x3x13" intercooler T-3 8lbs Boost wideband O2 255 walbro/420cc injecters bout to add some major cams i really just want a map for the MS-II that will correct the timing and fuel for the larger injectors and pump, i will have it tuned after the cams/head work/overbore/stroke out/T-4 upgrade, but i would like to be able to have fun with it in the mean time... work on a budget you know! lol Thanks for playing!