Jump to content
HybridZ

manchador

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by manchador

  1. I am looking for a complete distributor with crank angle sensor electronics. My car is not running and it seems that the CAS is the problem. Let me know if you have one available and for how much. Thanks
  2. I replaced all the gas from the fuel tank, and put a new filter in. I also measured the pressure between the filter and fuel rail and it is 24 psi. Does this indicate a faulty pump?
  3. I have not checked the fuel pressure. You said to measure it before the filter right? Could low pressure cause this?
  4. Hello everybody. I'm new to this forum. I would like to see if i can get help diagnozing my car troubles. It is a 1982 280zx turbo. I parked it back in 2000 because the rear end was making a clunky noise. In 2007 i sold it to a friend who had that fixed but never drove it or even registered it and i bought it back from him in 2008. The car was garaged from 2000 to 2007 then when i got it back it stayed outside for about a year. whenever i started it, it would run very rough and if i tried to move it, it would stall and die. After a while i noticed that if i kept spraying starting fluid through the intake, it would run normal, so i figured that at least one injector was bad. I found some injecors from a 300zx turbo and they are on the car right now. The car will only start if i squirt gasoline into the intake and will die once it burns that up. I pulled the injectors from the intake manifold but left them connected to the plugs, then i squirted gas in the intake and started the car. From this, i saw that the injectors are supplying gas because they were all squirting. Once again the car died when the gas in the intake was burned off. I had also replaced the connectors with the GM style injector connectors and dont know if i got the wires backwards. I went off a post i found doing a search. Any help with this is very appreciated. Thanks
×
×
  • Create New...