Search the Community
Showing results for tags '240z l28et 5 speed'.
Found 1 result
-
Hey Guys, I have just swapped an l28et into my 72 240z and it runs great. I got a 5 speed with my car, but it was never installed so I thought now would be the time to install it. I do not know the prior condition of the transmission, but it moved through all gears fine. I took the fly wheel, clutch disk, pressure plate, throwout bearing etc from my l24 4 speed transmission and bolted it on newly built l28et. The new clutch kit I bought was not bolting up properly and the flywheel the l28et it came with was in bad shape so I went with the stuff I knew worked in my old l24. Here is the problem, I can move through the gears with the shifter like butter, no issues. If I put the car in gear with the car off and I get out of the car and push it.... It can move freely. I put it in any gear, and it moves freely. With the car on, same issues. It is always in neutral. I can start it, put it in first and it idles. Does anyone have some insight on what could be potentially causing this. Maybe the whole transmission is bad? I usually assumed that the transmission would not go into gears if there was an issue. It seems as if the clutch is not engaged at all. I appreciate your help in advance. Thanks, Shane