Search the Community
Showing results for tags 'l24 l28 l26 l28et engine motor pull tools'.
Found 1 result
-
Sorry if this info is easy to find, I did a search and I know I have seen lists of "tools you'll need" before in DIYs and Walkthroughs but could not find one for this specific procedure. I'm going to Pull-A-Part tomorrow to pull an L28ET and I'd like to bring everything I need.So, what ALL tools will I likely need to easily and successfully pull a motor at Pull-A-Part?Thanks for any suggestions or if you have a link to this info somewhere. Even a DIY or Walkthrough for pulling an S30 motor or doing a motor swap. Hopefully I can do it in one trip without kicking myself for something I forgot. I did find some info on another thread on zcar.com with this list of tools: - 10/12/14mm socket - 10/12/14mm open and boxed wrench - ratchet and extensions (short and real long one) - box cutter - pry bar - flat and phillip screw driver So is there anything else? Seems like a 15mm and 17mm would be necessary too.
