No Start no Tach

[IzaBell 280]

I know this has been covered however I cant find any info on what to look for.

Car started about a month ago just fine.

Mush body work, removing fenders, paint prep work and a lot of it.

I went to start it tonight and no tach bounce.

I have a fsm although I cant believe the tach would suddenly stop working.

so no start...try a few things..no start

I disconnect the battery and connect it again.

Now when I turn the key I get nothing..just a fuel pump sound from the rear.

Im so clueless on what is happening.

Is there any thing I can check besides all the ecu prongs.

Or would that be the best place to start..no pun intended

ny help is much appreciated

battery is at 12.5 voltz

78 280Z

Edited May 25, 2011 by IzaBell 280

[rejracer]

Check the basics.

1. Is it getting spark?

2. Is it getting fuel?

3. Check all electrical connections, fusible links and relevant fuses.

 

Chances are you removed or unplugged something during the prep work.

[IzaBell 280]

It doesnt even turn over now

I re did the wires in the fuzeable links

nothing

So frustrated.

Any tips to get it to crank

I hope the motor isnt locked up

No real reason to think so

Is there a way to crank the motor without the key?

I believe there is I just jump the starter right?

need details.

[IzaBell 280]

SHE LIVES!

It was a blk ground wire that came out of a harness

under dash on passenger side

Plus the starter was locked.

I connected the wire and hit the starter with a hammer

Presto!

Started up two cranks