Super X Posted September 5, 2011 Share Posted September 5, 2011 (edited) If anyone has a 240z that their scrapping, i'm in need of an unmolested exhaust cut out from factory sheetmetal. I'll need it cut about 1/4 - 1/2in before the factory seam, about a 1/2 - 1in after the exhaust cut out "crease" line and alittle over the lower crease line for the bumper bracket. The red box in the picture below is the exact size I need cut: This is the hack job i'll be repairing If anyone can help me out please send me a PM. Thanks. Edited September 5, 2011 by Super X Quote Link to comment Share on other sites More sharing options...
RB240zDET Posted September 5, 2011 Share Posted September 5, 2011 Im about to scrap this 240z and I will check and see if this area is good to be cut out. Send me a PM later and I will get back to you. Thanks Quote Link to comment Share on other sites More sharing options...
Super X Posted August 20, 2014 Author Share Posted August 20, 2014 08/20/14.. BUMP! Still need very badly. Thanks! Quote Link to comment Share on other sites More sharing options...
88dangerdan Posted August 20, 2014 Share Posted August 20, 2014 Will this work for you PM me if interested Daniel Quote Link to comment Share on other sites More sharing options...
Super X Posted August 25, 2014 Author Share Posted August 25, 2014 88dangerdan, No I need the exhaust cut out in the exact length shown in the 1st pic. Not sure if the later 280z's cut out are the same but I know that the 240 & 260z's are identical with the same stepped lip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.