cygnusx1 Posted January 5, 2012 Share Posted January 5, 2012 UPS Broke my triple Weber Cannon manifold, and now I need to source another one. HELP!!! Quote Link to comment Share on other sites More sharing options...
z240 Posted January 5, 2012 Share Posted January 5, 2012 (edited) All is not lost. How badly broken is it? I repaired one where the connector casting between runner 2-3 was broken such that a 1.5 in diameter hole was left in the side of the #2 runner with that broken out plate still attached to the connector casting. It was a "cleanish" break. no little bits or shards. I fixed it using HTS 2000 welding rods, which I've grown to absolutely love. Totally easy using MAP gas torch. Put up some pics and I'll give you some ideas once I see it. If I remember tonight I'll take a couple of pics of the repair I did to help you understand how big the problem was and how easy it was to fix. Jim Edited January 5, 2012 by z240 Quote Link to comment Share on other sites More sharing options...
cygnusx1 Posted January 6, 2012 Author Share Posted January 6, 2012 (edited)  I bought a brand new one today since UPS is buying.  I will keep the old one and definitely take your advice for the repair.  It's a clean break between 2nd and 3rd runners, bent linkage, and a dented velocity stack. Edited January 6, 2012 by cygnusx1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.