Challenger Posted April 18, 2012 Share Posted April 18, 2012 Need either a late 260 or 280 grill. Need the plug (just a 4 inch section of wire with the plug) for the front right headlight as well as the entire front right turn signal assembly. Let me know what you have and how much. Quote Link to comment Share on other sites More sharing options...
zedsn Posted April 18, 2012 Share Posted April 18, 2012 Hi, I have a factory 1976 280z grill that has the upper wide section as well as the thinner underneath section as well. Pm if you are interested. Quote Link to comment Share on other sites More sharing options...
Challenger Posted April 23, 2012 Author Share Posted April 23, 2012 (edited) Got the grill and headlight wiring. Still need a front turn signal. I dont need the lense, chrome trim or hardware, just the housing, bulb, wiring and rubber shield/boot piece. Also needing a wiring harness from the dash. For my 78 280z, under the glove compartment there is a set of two black connectors, both are 5x2 with a split section that sections off a 1x2 section on one side. The harness goes to the hazard switch, radio, amongst other things. I mostly need just the harness but any of the other small switches or lights connected to it would be great too. Thanks Heres the connectors that go to the harness i need. Edited April 23, 2012 by Challenger Quote Link to comment Share on other sites More sharing options...
zentech Posted April 23, 2012 Share Posted April 23, 2012 Got the grill and headlight wiring. Still need a front turn signal. I dont need the lense, chrome trim or hardware, just the housing, bulb, wiring and rubber shield/boot piece. Also needing a wiring harness from the dash. For my 78 280z, under the glove compartment there is a set of two black connectors, both are 5x2 with a split section that sections off a 1x2 section on one side. The harness goes to the hazard switch, radio, amongst other things. I mostly need just the harness but any of the other small switches or lights connected to it would be great too. Thanks Heres the connectors that go to the harness i need. I have the wire harness and the turn signal bulb receptacle. Quote Link to comment Share on other sites More sharing options...
Challenger Posted May 1, 2012 Author Share Posted May 1, 2012 Bump still need this... Anyone? Quote Link to comment Share on other sites More sharing options...
Vonlam43 Posted May 3, 2012 Share Posted May 3, 2012 I might be able to help you out I have a 77 280z with almost 100% of the harness intact and I believe the receptacle as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.