Wesley Posted May 10, 2012 Share Posted May 10, 2012 I am going to upgrade to vented rotor 4x4 toyota calipers. I have a 1978 280z. When I bought the car it already had the normal solid toyota upgrade on it. I have 15x7 0 offset Enkei 92's on the car currently. I was wondering if the spacers are required for 14inch rims only? or do I need them for my 15's or if there is a way around this by shaving metal? I looked around and found what you need but not specific dimensions of everything. SO basically has anyone done the 4x4 Vented caliper conversion without the spacer on a 15inch rim? I don't like spacers...I do not feel like spending a bunch of money on 4 spacers(as they are just as expensive as a brand new set of rims) I feel like if I only got 2 spacers in the front they would oddly stick out. Just looking for some feedback from someone who has done this conversion...pictures would be most helpful as well and much appreciated. Thank You. Quote Link to comment Share on other sites More sharing options...
johnc Posted May 10, 2012 Share Posted May 10, 2012 Please do some more searching. 15 x 7 Konigs clear the S12W calipers just fine without a spacer. Also, spacers from Summit and Jegs are not that expensive. Quote Link to comment Share on other sites More sharing options...
Wesley Posted May 11, 2012 Author Share Posted May 11, 2012 Thank You I guess I didn't look hard enough. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.