randy 77zt Posted May 20, 2002 Share Posted May 20, 2002 went to a ford factory training school last thursday/friday.found out the instructor has a NEW (not fired up yet) dohc 4.6 cobra engine+trans and all ecm,wiring ,afm,h-pipe,air filter housing,throttle cable.engine has serpentine belt on and has a/c and power steering pump & alternator mounted.he wants $6500 for all parts .i cant afford this but i thought i would pass it along in case a member is looking for nice clean parts.send email if needed. Quote Link to comment Share on other sites More sharing options...
Guest kc6wfs Posted May 20, 2002 Share Posted May 20, 2002 What HP are those rated at. Sounds like a sweet motor.. Dave Quote Link to comment Share on other sites More sharing options...
BLKMGK Posted May 20, 2002 Share Posted May 20, 2002 300HP I think. Pretty wide motor but it revs nice. Make sure you measure well and that the stick will line up. Quote Link to comment Share on other sites More sharing options...
auxilary Posted May 20, 2002 Share Posted May 20, 2002 305hp and 300ft lbs of torque, 9.85:1 compression Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted May 20, 2002 Share Posted May 20, 2002 Thats not alot of torque really for the output IMHO, upper end HP I'm guessing eh? Regards, Lone Quote Link to comment Share on other sites More sharing options...
auxilary Posted May 20, 2002 Share Posted May 20, 2002 in stock form it makes peak hp at 5800 rpm, if i recall correctly Quote Link to comment Share on other sites More sharing options...
randy 77zt Posted May 20, 2002 Author Share Posted May 20, 2002 these engines like to rev and work with a 3.55 rear well.engine is wide .sump on oil pan is in rear.block is aluminum.you would need to buy an evtm manual(ford wiring harness diagram) book for a 98 mustang.probably not the most powerfull but would run good in light car and a good install job would be a show stopper at next motorsport show. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.