240zBoy Posted October 15, 2012 Share Posted October 15, 2012 These dang lights are the only thing holding me back from driving this z around and I am at a wall. I purchased a used combo switch online and put it in, no difference. Cleaned up the inside of the combo switch and still nothing. I have been doing research and people say the green and white wire is normally the culprit but I dont know. I recently did do the headlight relay modification but everything there seems to be right. Problem is the red/black wire to the low beam relay is not sending any power and thus not triggering the relay. In addition to all these, the middle relay on the right side of the fuse panel labeled Park. Tail 20A was blown so I put a new one in and it to blew :/ so possibly could have an issue there related Please help me out Quote Link to comment Share on other sites More sharing options...
Dat260 Posted October 16, 2012 Share Posted October 16, 2012 You have a short obviously, check your bulbs and bulb sockets. My culprit was the front left blinker, the socket was rusted and created a short. I was driving for awhile without the lense so it got corroded. cheers, Quote Link to comment Share on other sites More sharing options...
Domzs Posted October 17, 2012 Share Posted October 17, 2012 What year are we working on ? Quote Link to comment Share on other sites More sharing options...
ihiryu Posted October 17, 2012 Share Posted October 17, 2012 My problem was actually my right front blinker. Had some corrosion in it and it kept blowing my fuses too Quote Link to comment Share on other sites More sharing options...
Domzs Posted October 17, 2012 Share Posted October 17, 2012 What year are we working on ? From what can tell the red/black wire sends ground , not power . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.