Zfan1 Posted March 25, 2013 Share Posted March 25, 2013 Well it is official we got it in this weekend! A little messaging but if anyone doubts it, it ain't near as hard as I figured going into the swap. Will post pictures of the purple turd tomorrow. Just need to figure long tube headers out, drive shaft shortened again, radiator lines and harness. Got the fuel system in using a Bosche 044 pump, Wix Corvette regulator, filter and return. Made our own hard lines trans cooler using 3/8 hard brake line and my friend who can bend anything...friends are a good thing...LOL Mike Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted March 25, 2013 Author Share Posted March 25, 2013 Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted March 25, 2013 Author Share Posted March 25, 2013 Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted March 25, 2013 Author Share Posted March 25, 2013 Quote Link to comment Share on other sites More sharing options...
SUNNY Z Posted March 25, 2013 Share Posted March 25, 2013 Looks good! keep us updated. Quote Link to comment Share on other sites More sharing options...
Domzs Posted March 25, 2013 Share Posted March 25, 2013 My guess , you are a friend of Jake in Denton . Quote Link to comment Share on other sites More sharing options...
actionjackson Posted March 25, 2013 Share Posted March 25, 2013 Awesome Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted March 26, 2013 Author Share Posted March 26, 2013 (edited) My guess , you are a friend of Jake in Denton . Jake who? I know a Jake and Jake Jr. they did an LSX Mustang. Edited March 26, 2013 by Zfan1 Quote Link to comment Share on other sites More sharing options...
Domzs Posted March 26, 2013 Share Posted March 26, 2013 Jake who? I know a Jake and Jake Jr. they did an LSX Mustang. He works at Christian Brothers Auto in Denton . Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted June 27, 2013 Author Share Posted June 27, 2013 I know Jake, he works with a good friend of mine Daniel Muse at CBA in Corinth. The car goes in Saturday for the trans mount, header message and exhaust system. I have the 3rd thru the 8th off so I plan on finishing the wiring and getting the body back together, dash should be in as well. Time to get serious and rock and roll! Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted August 25, 2013 Author Share Posted August 25, 2013 Updates on the build, just finishing the wiring, now if the ECM/TCM would hurry up and return from Geoff and EPS. Should be up and running in the next couple of weeks. Quote Link to comment Share on other sites More sharing options...
Domzs Posted August 25, 2013 Share Posted August 25, 2013 Looking good . Jake told me about you and your car . And I spoke to one of you on the phone awhile back . Like to see some pic of your cage . Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted August 25, 2013 Author Share Posted August 25, 2013 Some pics of the group by headers made to fit my 4L80E. Also 3" dual exhaust, single muffler set up. Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted August 25, 2013 Author Share Posted August 25, 2013 Domzs: Here you go, pic's are not the greatest. Took them with my trusty Iphone 5 Quote Link to comment Share on other sites More sharing options...
Domzs Posted August 25, 2013 Share Posted August 25, 2013 Domzs: Here you go, pic's are not the greatest. Took them with my trusty Iphone 5 Looks pretty good . Not bad for $600 . Thanks . How much ground clearance do you have on the exhaust system ? Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted August 26, 2013 Author Share Posted August 26, 2013 Cars on jack stands with wheels off right now but it looks pretty good, no issues that I can see. My old 2.5" exhaust cleared easily. Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted September 15, 2013 Author Share Posted September 15, 2013 Got it running today, still have some loose ends to clear up. I have video but not sure how to post it...lame I know, I am no techie...LOL Quote Link to comment Share on other sites More sharing options...
Domzs Posted September 15, 2013 Share Posted September 15, 2013 Awesome ! Congrats . Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted September 15, 2013 Share Posted September 15, 2013 Yeah!!! Quote Link to comment Share on other sites More sharing options...
Zfan1 Posted September 17, 2013 Author Share Posted September 17, 2013 http://youtu.be/i9dWPcaDtdI Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.