BLOZ UP Posted July 22, 2013 Share Posted July 22, 2013 I'm looking to get Speedhut's 2-5/8" gauges to replace my stock center 3 gauges. I see the Speedhut now offers 3-3/8" as a size. Has anyone tried those in the center? It looks like you'd not be able to use the original bezel and gauge housing. Quote Link to comment Share on other sites More sharing options...
rsicard Posted July 26, 2013 Share Posted July 26, 2013 It sure is nice to reuse the original gauge housing to mount the new gauges. Have done that with Speedo and Tach. Then on to the center three. Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted August 12, 2013 Author Share Posted August 12, 2013 No one's tried the 3-3/8" gauges? Quote Link to comment Share on other sites More sharing options...
rsicard Posted August 13, 2013 Share Posted August 13, 2013 Yes I have used the 3 3/8 inch Speedo from Speedhut. Machined a round flat plate to fit within the original guage rear metal housing. Then machined a round hole within the flat plate to mount the 3 3/8 inch speedo. Then the round flat plate is tack welded within the rear metal housing as close as possible to the large front opening behind the 4 indents on the original metal housing. Machined two plates the same. Have yet to order the other 3 3/8 inch Speedhut 4 in 1 gauge for Fuel Qty, Oil Press, Water Temp, and Volts. Tach will be mounted separately. Will put multiple temp sensors (LH, RH Cyl Hd Intake Manifold etc.) in through rotary selector switch to Water Temp Gauge. May do the same with the Oil Press gauge. Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted August 13, 2013 Author Share Posted August 13, 2013 Ah, I see. So you're getting the 3-3/8" for the center gauges? Quote Link to comment Share on other sites More sharing options...
R_3 Posted November 25, 2013 Share Posted November 25, 2013 Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted November 25, 2013 Author Share Posted November 25, 2013 Use your words. Is this what you ordered? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.