jessejames Posted August 10, 2013 Share Posted August 10, 2013 My sr20det sprang a leak on the oil feed to the turbo. The car was running fine before this. I got the car home. I replaced the line. During the installation i removed the intercooler piping from the hot side to get the lines on. I took the car for a drive, everything seemed fine. A few days later i tried to take the car for a drive and it hesitate and shook the car. I was also not building boost. I got the car home and removed the intercooler piping thinking it was a leak. I very carefully replaced the the piping. The car will now barely start. It will have a very rough idle for a few seconds and then shut off. During the idle the Afr is 16 or 17. I disconnected the MAF. It made no difference. I noticed the fuel pressure was dropping as well. I removed the vacuum line to the fpr and had a steady fuel pressure of 43psi. Any ideas . Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.