74Adam Posted October 25, 2014 Share Posted October 25, 2014 Ok, so I have the LM-1 set-up and I'm getting a reading on the LM-1 controller so obviously the sensor itself is working. I can't get the output to register in tunerstudio however. I have the analog output cable that has a red wire, a white wire and an unshrouded mass of wires. Is the exposed wire ground? My understanding is that you take that ground wire and ground it to the same place as the ground from the MS unit. I have the LC-1 with 0-5V range picked in tunerstudio. Am I missing something here? thanks Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted October 25, 2014 Share Posted October 25, 2014 IIRC The red and white are the analog outs (1 and 2, maybe not in that order), the rest is the ground. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.