sloganish Posted December 28, 2014 Share Posted December 28, 2014 Greetings HybridZ! Scoured the internet for wiring diagrams but cant seem to trace them back to this. I have finished my LS1 swap and when I turn the key in the "on" position I have nothing. This is the only remaining plug I can track down to being the cause, but I must have spliced it off when pulling the OEM harness out from the engine/trans. They are bunched together, 2 blues, 1 green, 1 red. They come right off the harness on the passanger side by the shock tower. Any advice on where these lead? Quote Link to comment Share on other sites More sharing options...
nickbenjones Posted March 1, 2015 Share Posted March 1, 2015 i believe the red wire splices into the dropping resistors for the fuel injectors. the green is the signal wire from the ignition, blue wires are ground i believe. easy to find out though with a continuity meter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.