NylonAdmiral Posted April 1, 2015 Share Posted April 1, 2015 Does anyone have a drawing or dimensions for an oil pan suitable for an RB26 -> 240z install? I was about to remove my oil pan and offer the engine up to the car to work everything out and make my own drawing but it occurred to me that probably other people may have already done this and I know quite a few people have made their own oil pans for the same application.If anyone has a drawing for a suitable oil pan I could work from it will save me having to repeat this process myself. I know there are plenty of manufacturers in the US who sell these oil pans off the shelf but I'm based in the UK and it's actually more cost effective (due to shipping & duties) to have one custom made than to import one.Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Dakota240Z Posted September 2, 2015 Share Posted September 2, 2015 Hello, just wondering if anyone ever send you their drawings or dimensions for the oil pan ? I have been searching around myself and I wasn't able to find anything. would you be able to send me the dimensions of yours if you have them, thank you ! Quote Link to comment Share on other sites More sharing options...
NylonAdmiral Posted September 2, 2015 Author Share Posted September 2, 2015 Hey, no nobody ever shared a drawing with me. To be honest, it's not actually that challenging to work out. My oil pan is now fitted to my engine so it's not very easy for me to do right now. I'll be removing it again at some point though so could take a look at it then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.