thezguy Posted April 20, 2015 Share Posted April 20, 2015 Anyone used this diff or gears? I have the 95' Q45 short nose R200 and have been searching for a lower gear. This would be perfect if it's a direct swap over. Anyone have any idea? Quote Link to comment Share on other sites More sharing options...
thezguy Posted April 20, 2015 Author Share Posted April 20, 2015 (edited) Appearnetly there is a 2.93 available in the pathfinder R200 as well? Edited April 20, 2015 by thezguy Quote Link to comment Share on other sites More sharing options...
socorob Posted April 21, 2015 Share Posted April 21, 2015 Can the gears be swapped from the pathfinder case into the q45 case? Quote Link to comment Share on other sites More sharing options...
mdccwireless Posted June 1, 2015 Share Posted June 1, 2015 I'm actually trying to find out the same thing, but to do the opposite. I want to swap my Pathy's R200 gears for shorter ones. I've got the V6 4WD with 3.36. I'm looking to swap in a 3.692 geared R&P, but the spline count and the input flange is what I haven't found any specs. FYI, the V6 2WD carries 3.13, and the V8 2 or 4WD have a R230 geared in 2.93. I was about to buy a locking M/T 370z diff, that matches the input flange 4 bolt and output flange 6 bolt of my diff and swap the whole thing. But I believe my stub axle although it is a 6 bolt even spaced, it has larger flanges. Next option will be to see if I can swap only R&P in 3.692. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.