uncle charlie Posted July 18, 2016 Share Posted July 18, 2016 (edited) I just ordered a set of the chrome and fake wood door panel trim pieces and wondered if anyone has replaced theirs before. I'm wondering what the best process is for removing the old trim and installing the new. Here's the pieces I ordered. Thanks! Edited July 18, 2016 by uncle charlie Quote Link to comment Share on other sites More sharing options...
dmoralesbello Posted July 19, 2016 Share Posted July 19, 2016 Pretty simple really: with the door card removed, looking at the inside, you will notice 4 (?) small metal tabs that go through the board and twist to hold the trim piece in place. Carefully untwist these (they are delicate) and gently pull the trim form the outside and it should come right off. No adhesive on mine and it was the original door skin. Quote Link to comment Share on other sites More sharing options...
uncle charlie Posted July 19, 2016 Author Share Posted July 19, 2016 Cool. Thanks for the info, I'll give it a shot today. Quote Link to comment Share on other sites More sharing options...
madison Posted October 20, 2017 Share Posted October 20, 2017 Did you find the tabs you were looking for? Quote Link to comment Share on other sites More sharing options...
uncle charlie Posted October 20, 2017 Author Share Posted October 20, 2017 No, there were no tabs on the backside. The strips seem to be plastic welded in place so I left them alone for now. Quote Link to comment Share on other sites More sharing options...
madison Posted November 8, 2017 Share Posted November 8, 2017 Thanks Uncle Charlie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.